Double-clicking on a page of a document in the PDF24 Editor opens a viewer of the document. This viewer now opens maximized and no longer in a small window.
Older versions uses the font Times New Roman in the Save As Dialog UI. This font looks a little outmoded. This font was replaced with Verdana. Now, the options in the Save As Dialog are better readable.
Automatic page rotation is now used in all default profiles. This wasn't the case in older versions. Automatic page rotation were not used in in the good and best profile which was a little confusing. Now the automatic page rotation options are consistent.
A new retry upload feature was added to the fax tool. Sometimes fax file transmission results in an error. A reason can be a bad internet connection. If the transmission results in an error a retry button and an information message is displayed. Clicking on the retry button restarts the fax file transmission.
Saving a file in PDF24 editor under a new name did not updated the UI name element of that file. This version fixes this issue.
The Drag & Drop support in the file list of the file explorer in the PDF24 Editor could cause problems under some circumstances, which can result in a data loss. The bug is fixed. We recommend to update to the new version.
This bug is one of the reasons why the PDF24 Editor could not open some PDF files. Opening such PDF files crashes the application. This bug is fixed.
Dropping files from some applications could cause an unresponsive PDF24 Editor. Outlook was one of these applications. This problem ist fixed.
The new version 4.4 also install the new PDF24 FAX printer on all windows versions. The new FAX printer is a very
handy new printer which enables you to send faxes very easily.
Printing on the Fax printer opens a small form where you can enter the FAX number of the target device. A preview
of the fax is also displayed.
The Faxes are sent through the new PDF24 Fax service, which is located at fax.pdf24.org. To send faxes, a short
registration is needed.
Currently the service is completely free, but limited to a few number of faxes each day. After a short beta phase
the service will be extended and then you can remove the limits by paying for each fax. Receiving faxes will also
be possible by registering and paying for a fax number.
Names for documents in the PDF24 Editor are now the file names when dropping file to the job list or when opening a file from a file system. This is more intuitive and easier. If a name can not be determined, e.g. if a drag & drop operation does not deliver a name, then a new name is created for that document.
Importing a single file via File->Import->From filesystem did nothing. Importing multiple files worked without problems. This bug is fixed.
This version uses leading 0 in front of the page number. This improves the sortability of the produced page image files. Old names and sorting was like this: Page1, Page10, Page11, ..., Page20, Page2, Page3, Page4, Page5. This is changed to the new names: Page001, Page002, Page003, ..., Page010, ... Page020. This is better for sorting.
The new supported for keys are LEFT, RIGHT, HOME, END. This eases the navigation inside a document.
The new supported keys are UP, DOWN, PAGE_UP, PAGE_DOWN. This eases the navigation inside the document list.
The support for the new keys introduced some new complexity concerning the drag & drop of pages. The drag & drop components have been overworked to fix all these problems.
The debug console received not every outputs which were produced by the applications. This problem is fixed.
All components now link against the msvcr100.dll and msvcp100.dll, which are part of the setup. This reduces the size of the PDF24 Creator and enables some nice things for the future.
We have fixed two temporary file bugs which could result in non-deleted temporary files when deleting jobs in PDF24 Editor.
Overworked the automatic document conversion part with the result of some small improvements.
Conversion of multiple documents is now sequentially and uses less system resources which solves the problem of a wrong document order in most cases. Documents can be sorted, but if the documents have no sortable names then sorting gives no good results.
Printing multiple documents on PDF printer with opened PDF24 Editor is sequentialized too. This solves the ordering problem and uses less resources.
Printing a lot of documents on PDF printer with opened PDF24 Editor - such as reports from an access database - works better now. We have fixed some bugs which were the reason for lost documents and incorrect ordering. Less system resources are used too.
Fixed a bug in all languages files: rotate-left and rotate-right keys were reversed
We have added some new parts to the Updater which makes the Update more flexible. Furthermore we have fixed some small bugs which could cause errors.
Opening and saving PDF files in PDF24 Editor could generate an erroneous PDF file which could not be opened by a PDF reader. This was a minor bug because the problem only occurred on some special PDF files. Furthermore we have enhanced some PDF components so that the PDF24 Editor can open more PDF files.
The PDF24 Creator could not start if the users personal folder was not reachable. One cause why this folder can not be reached is that the folder is stored on a network drive and the network is not available. We have fixed this bug. Now the PDF24 Creator also runs if this folder is not available.
Some user work with the right shift key to select something. Before this release the PDF24 only supported the left shift key to select pages in the PDF24 Editor. This version introduces the support for the right shift key.
The component which installs the PDF printer driver contained some minor bugs which could be the cause why a PDF printer driver could not be installed. We have overworked this part and now PDF printer driver installation should work better.
The setup also contains some text elements which are to be translated by translators. This elements are now part of the PDF24 Creator language files so that the translators can translate these elements.
The version number was not correctly compiled in so that the version number could not be displayed correctly in PDF24 GUI. Instead of the version number a c cryptic text was shown. The version number is highly important for the update process. Without a correct version number no updates will be found. This bug is fixed.
The recently published version 4.0.0 contains a bug which prevents a component to make the PDF24 PDF printer temporarily to the default one. This is bad because this caused that some documents could not be converted to PDF and nice drag & drop conversion in editor is not working. We have overworked this part of the application and now everything should work fine.
Version 4.1 introduces a new component based setup by which single components of the PDF24 Creator can be selected or deselected.
Currently there is only a single component but in the near future we will add some more optional components which than can be
checked or unchecked during setup phase.
This new feature is also helpful for system administrators. Admins can select or deselect some components via the command line.
A list of all supported command line arguments of the PDF24 Creator setup is located here:
PDF24 Creator Setup Parameter
Meta information are helpful for translators. We have added the encoding information because PDF24 Creator language files should be encoded in UFT-8 with BOM.
This new feature makes a debug console visible to the user into which debug outputs are shown. This outputs helps in some circumstances to find errors. If you have problems with PDF Creator you can open the console and you can email the outputs to us so that we can look at it to find problems.
If another version of Ghostscript was installed in your system PDF24 had problem to work correctly if the version installed by PDF24 and the other version was different. PDF creating failed in this case. This was bad because Ghostscript is installed on many computers and all those people could not use the PDF24 Creator. We have searched the problem and we have found and fixed it in this version.
The save all icon in the PDF24 Editors documents toolbar was selectable in some cases if no document was visible. This was a wrong state. We have corrected that so that the button is only usable if documents are available.
There were some PDF profile inconsistencies in exchanging data between several PDF24 Creator modules. In most cases users shouldn't have noticed anything. We have fixed this problem in version 4.0.
Fixed a bug when dragging a document in PDF24 Editor to Windows Explorer. Dropping failed in prior versions.
This feature is provided by the PDF24 Editor and is located in context menu of pages. Just right click on a page of a document and you will see two options to add blank pages. Blank pages can be inserted before or after a page. The inserted blank page has the same dimension as the page before or after which the blank page was inserted.
With this bug fix the PDF24 Creator now can open more PDF files. Some special PDF files could cause problems. There are still some PDF files which can't be opened by the PDF24 Editor. If a PDF file can't be opened there is a trick to open the file. Just print the file on the PDF24 PDF printer to create a new PDF file based on the old one. The new file should work fine. That's possible because real PDF readers often can still open these files.
Use this flag when installing the PDF Creator to disable update checking and installation. This flag is useful for companies which wants too use the PDF24 Creator on their clients. Use this flag and you can disable updates which are often the preferred update mode.
The new name is often better than the old one because the user has to do some more things after clicking on the save button. The Continue... button is better if some more steps follows.
The PDF24 Creator is available in 16 different languages. To make the PDF24 available to more people we need more language files. If you have translated one language files to a language which is not available in PDF24 Creator setup then send us your file and we will add it to the PDF24 setup. Many people would be very thankful.
We have overworked all language files and added missing parts. Not translated parts are marked with a #! marker. All these lines needs to be translated by translators. Please translate these parts and send us your files.
The PDF24 Editor had stored not used data longer than required. We have fixed this. Not used data is freed as soon as possible.
We have added a context menu to the page container in the page extract dialog. This context menu contains a invert selection entry which inverts the current selection of pages. This new feature is useful if extracting pages of large documents.
Now you can use the mouse wheel to scroll up and down in the page container of the page extract dialog. Very useful when using large PDF files.
We have worked hard on PDF24 Editor to increase the usability. The focus was on Drag & Drop support.
Drag & Drop Operations which are currently supported:
The import dialog in File->Import->From file system now supports selection of multiple files at once. Prior this version only one file after another could be imported.
In previous version only the first page of a multi-paged TIFF file was imported into the PDF24 Editor. Now all pages become imported into a single document.
After PDF file creation the assistant opens which has a sent via email button. After clicking this button the user has to enter a PDF file name which us used as the filename for the email with the attached PDF file. The problem was that the entered name was converted to lowercase letters regardless whether the user had entered uppercase letters. This problem ist fixed.
In image to PDF conversion process the paper size of the final PDF files was computed with a fixed DPI values and the image size. The conversion of large images results in large PDF file paper sizes. This is a little problem especially when merging PDF files. The PDF file with the images could be very large and the displaying of the merged file was bad in such circumstances. Now we optimize the paper size to A4 format. The paper size of PDF files from large images will always be not greater than the A4 format. The paper size of small images remains as in previous versions of the software. In future versions we have planned to add an option to preferences to make this configurable.
Not it is possible to save document from the PDF24 Editors document list via Drag & Drop. Just drag & drop a file to a target and the PDF file is saved automatically and transferred to the target. We have planned to add more drag & drop support to the editor.
Language files which has been renewed are Japanese, Italian, Lithuanian and Czech. The new language file is the Danish one.
There was a bug in creating and selecting profiles. If you had added and then selected a profile without selecting a signature the PDF24 crashed. This bug is fixed. Profiles should work without signatures now.
The watermark could not be printed under the content of the file. It always was printed above the content regardless what option the user had checked. This problem is fixed in this version.
In composing and merging process could be a noticeable quality loss in PDF file with images. The reason was some incorrect settings. This problem is fixed.
Image resolution options are now part of the save as dialog in PDF pages. You can enter your preferred image resolution. This is useful if you want to fine-tune the PDF quality and therefore the PDF file size. Lower resolutions results in a smaller PDF file.
This new feature gives you the possibility to combine the content of a PDF file with the content of a digital paper. The content of the digital paper is displayed under the content of the PDF file. This has the same effect as if you had printed the PDF file on a normal printer with special paper. The digital paper can contain more than one page. The last page of the digital paper can be repeated and underlayed to the other pages of the PDF file.
The language files has been updated. A lot of new text are translated. Thanks to the translators. The current PDF24 Creator contains some new text elements which needs to be translated.
The new feature makes it possible to add a watermark to a PDF file. The new feature is located in save as dialog. Click on Save As button in assistant and you will see the new menu entry. There are a lot of options to configure the watermark. You can configure the Text, the font, the font size, the angle, the color, the mode and the margins. All options can be saved into a profile. This new feature can be used as a stamper too. Choose the overlay mode and the text will be printed on top of the page content.
PDF/A OutputConditionIdentifier Bug fixed. The OutputConditionIdentifier couldn't be set. PDF/X and PDF/A Bug fixed. There could be problems in creation of these types. Weboptimize bug fixed. The Weboptimize feature could not be used.
This change provides the signature feature also in assistant. You don't need to open the editor to add a signature to a PDF file. You can also use the signature with profiles. Make your settings in Save As dialog, save all into a new profile and than you can use the new profile instead of making all settings again. The eases signing PDF files. Currently there is a limitation web optimize feature. Signature and web optimization can't be used together.
The old PDF signature process has been removed from PDF editor because the old variant is not needed any longer. In the last version we have change the editor which uses the Save as dialog. This dialog now contains the PDF signature feature. Therefore the old dialogs are redundant.
Security settings in PDF preference pages contained a bug. PDF permissions have not been set correctly into the PDF so that permissions were wrong. We have removed the bug and now PDF permissions should work correctly.
The head of each language file contains a block with note for translators. Please read the notes if you plan to translate a language file.
We have updated all language files and marked missed texts with the #! marker. We have received a new Spanish language file with a lot of corrections. Furthermore we have added the new language file Vietnamese which we have received from a user.
For some documents, the rotation function did not work correctly although the pages were shown at the right angle. It could be that that the rotation was changed after saving a document. This problem is fixed. The rotation should now work correctly. Please note the automatic page rotation feature in saving dialog. If this property is marked in this dialog, the rotation can be changed during saving. The automatic rotation depends on the text in the document and is set accordingly for each page.
The properties dialog of a document which was accessible via the context menu has been removed. This has become redundant. All properties of a document can now be set when saving. There is also a new dialog as it already exists in the assistant in the save as function. The use of profiles is possible in this new dialog which speeds up working.
The new properties dialog to set properties of an output format was also added to the sign and mail function so that you can also set your desired properties prior.
All people who have already missed the feature have it now. Files are now sorted in Explorer.
In some situations the PDF quality was not set properly. We have fixed this problem.
If you have already translated the PDF24 into another language, then send us your translation and we add it to the PDF24 Creator setup.
There is the possibility to rotate pages of documents. The new feature can be found in context menu and the main toolbar. You can rotate single pages, all pages or selected ones.
Now you can sort opened documents in PDF Editor. The new feature can be used via toolbar. The sorting function always uses the document name and can sort in ascending or descending order. The new feature is very useful when editing many documents like many images which are to be merged to one PDF.
The main menu in editor has been re-structed and extended by some new elements.
If there where remote devices connected to a PC which where temporarily not available then the PDF24 Editor started and closed very slowly. The problem was the request of information of the remote drives which ends in a timeout. This problem is fixed.
The structure of all language files has been checked and missed elements has been added. Some parts of some language files are not translated. These texts are marked with the letters #! at the beginning. Translators, please translate not translated texts and check the language files.
There could be problems in saving a PDF file using a user profile. The PDF file could be broken.
There was a bug in file name determination process when printing a file via PDF24 PDF printer. If a file name contains more than one dot the name could be truncated to much. Normally only the file extension should be truncated. This bug is fixed in this version.
There was a bug with case sensitivity in save as dialog in editor. If the user entered a file name with capital letters these letters becamed converted to lowercase letters and the PDF file was saved under the filename with the lowercase letters. This was a bug which is fixed now.
The creation of large files was not possible because of a bug. The progress bar in PDF creation process showed 100% but the process doesn't finnished. We have fixed this bug. Large files can now be created as well as small ones. Users are recommended to update to this version.
In PDF24 Creator settings a default PDF profile can be configured. This configured profile was not used as default profile in assistant and PDF editor. This bug has been fixed. If a PDF has been created the assistant and the editor now uses the default profile as the selected one. The user can change the profile for each PDF file separately.
The bottom bar did nothing special. We have classified the bar as unnecessary. The bar has been removed. The application has now more room for the explorer and the files. This helps to increase the usability.
The split view has been enhanced. The ration between explorer and files is now 40 to 60.
The drives in explorer were displayed as drive letter (C: D:) only. Now there also the drive name if there is any.
A bug in file explorer could cause that some directories could not be opened. This bug is fixed.
The PDF24 Editor saves the last opened directory in file explorer so that this directory will be opened the next time the editor starts. Previous versions always opened the favorite directory.
If images or other documents were converted to PDF then there could be a problem while choosing a filename to save the PDF. If known file extensions are hidden in Windows the user had no chance to choose the correct .pdf file extension with the result that the saved file had an incorrect extension and was not recongnised as PDF in Windows Explorer. We have fixed this bug.
Because of a bug several settings in save as dialog were not applied to the saved PDF. It was not possible for example to set security settings of a PDF. We have fixed the bug which has slipped in in one of the earlier versions.
The Screen Capture feature and the conversion of images to PDF was broken. There were some bugs in the PDF API which we have fixed in this version. Screen Capture and Image to PDF conversion now works.
We have fixed some bugs in PDF API. Some special formatted PDF could cause problems while reading the PDF. There was another bug with encrypted PDF files. Normally encrypted PDF cannot be opened in PDF24 Editor but it was possible in version 2.9.1 which results in errors. Version 2.9.2 blocks encrypted PDF. If you want to open the encrypted PDF just create a new non encrypted file by printing them on the PDF24 PDF printer. This creates a new PDF file which is not encrypted.
If the PDF24 Editor was open and overlayed by other windows and if you printed a document on PDF printer so that the editor loads it the application windows stayed in background and became not a foreground window. There was no possibility to bring the window to front. We have fixed this bug. Not the windows automatically becomes a foreground windows if a new files is available.
There was no option to create multi-page TIFF files in save as dialog. If a file had more than one page every page was saved in a separate TIFF file. A TIFF file can be multi-page. We have added this option. If selected a multi-page TIFF file will be created.
Abbiamo corretto alcuni bug minori e siamo tornati a una versione precedente di Ghostscript. In creator di PDF24 abbiamo introdotto Ghsotscript 9.0, ma questa versione di Ghostscript sembra essere instabile. A causa di ciò abbiamo deciso di implementare una vecchia versione di Ghostscript in PDF24 Creator 2.9.1.
Abbiamo introdotto un’interfaccia con la quale è possibile integrare applicazioni di altri servizi. Questa nuova interfaccia è esclusivamente per scopi futuri. Il servizio di stampante PDF utilizza già la nuova interfaccia.
Abbiamo ridotto le dimensioni del setup a circa 3 MB.
E’ stato integrato Il supporto per la creazione di PDF / X e file PDF / A. Questi due nuovi formati di file possono essere creati utilizzando la finestra di dialogo Salva con nome. Ognuno di questi formati ha le sue proprietà che possono essere configurate nella finestra di dialogo.
Nelle versioni precedenti dell’Editor di PDF24 le pagine potevano essere selezionate solo una alla volta. Non c’era possibilità di selezionare più di una pagina alla volta. Questo non era un problema per i documenti con solo poche pagine, ma se il documento era grande e se si voleva selezionare un intervallo di pagine si doveva selezionare ogni pagina manualmente utilizzando il tasto CTRL e il tasto sinistro del mouse. Abbiamo migliorato questo. Ora è possibile selezionare un intervallo di pagine utilizzando la combinazione LSHIFT e il tasto sinistro del mouse. Il comportamento è simile a quello della selezione di file di Windows Explorer. Per fare una selezione intervallo fai così:seleziona la prima pagina facendo clic con il pulsante sinistro del mouse e scegli l’ultima pagina tenendo premuto la combinazione LSHIFT. Se premi anche il tasto CTRL allora questo intervallo di pagine saranno aggiunte alle pagine attualmente selezionate, altrimenti tutte le altre pagine saranno deselezionate.
Nella finestra di dialogo Salva con nome è possibile aggiungere e preconfigurare i profili con i quali si vuole salvare un file. Se si definisce un profilo per il tipo di file PD, questo profilo sarà allora utilizzabile nella lista profili dell’assistente. In questo modo si risparmia tempo.
C’è una nuova opzione nelle impostazioni con cui è possibile configurare il comportamento di chiusura dell’assistente. Attivando l’opzione di chiusura subito dopo il salvataggio, l’assistente si chiuderà automaticamente dopo che un file è stato salvato.
Ci sono stati alcuni font non corretti in alcuni campi di input che non combaciavano con il resto dell’interfaccia utente. Per migliorare questo abbiamo modificato alcune parti fondamentali del nostro motore di rendering.
Un profilo nella finestra di dialogo Salva con nome contiene ora l’opzione per quale tipo di file di destinazione è stato creato un profilo. Un interruttore del profilo apre ora la pagina del tipo di file di destinazione per cui è stato creato il profilo. Questa proprietà viene utilizzata anche nell’assistente per la raccolta di tutti i profili PDF e per metterli a disposizione nella finestra di selezione profilo di assistente.
Si verificavano dei risultati imprevedibili nello strumento di conversione, quando veniva utilizzato con più file contemporaneamente. Questa versione contiene una soluzione per quel problema. Ora è possibile utilizzare lo strumento di conversione con più file senza alcun problema. Lo strumento di conversione è usato dall’editor per convertire automaticamente i documenti in PDF, trascinando i file nell’apposita area dell’editor.
I documenti con una sola pagina non potevano essere firmati a causa di un bug in un algoritmo. L’editor si bloccava quando provava a farlo. Abbiamo corretto il bug.
Un PDF non poteva essere salvato quando Le proprietà di Ottimizzazione per la rete e le opzione di sicurezza con password utente erano attivi. Questa versione contiene una soluzione per questo problema. Se la protezione con password utente è attiva, un PDF non sarà ottimizzato per web. Miglioreremo questo comportamento nelle versioni future.
Abbiamo migliorato e cambiato alcune parti del programma di aggiornamento del creator di PDF24. Il nuovo aggiornamento contiene una nuova modalità di richiesta di aggiornamento che è più flessibile. Con questo cambiamento ci stiamo preparando per il futuro vista la crescente richiesta di aggiornamenti.
L‘obiettivo di questa versione è stato l‘ottimizzazione dell‘installazione dei driver della stampante PDF. Abbiamo introdotto un nuovo meccanismo di installazione che ha alcuni vantaggi rispetto alle vecchie varianti. Questi sono:
Abbiamo corretto due bug nel nostro lib PDF che ha causato problemi in lettura e scrittura di speciali file PDF. Abbiamo anche aggiunto alcune nuove parti nel lib per costruire nuove funzionalità per le versioni future di Creator PDF24.
Non c’è più bisogno delle chiavi di registro per Ghostscript. Siamo passati alle variabili d’ambiente che sono anche in grado di eseguire Ghostscrpt. Questo ha un vantaggio principale: Un utente può installare altre versioni di Ghostscript senza che questo influenzi più Creator PDF24.
La modalità 3-bit del filtro di output BMP è stata rimossa. Questa modalità non è possibile.
L’installazione contiene ora immagini con le pecore. Le immagini sono migliori di quelli vecchie. Durante l’installazione tutti possono vedere le immagini con le pecore facendo una buona impressione alle persone che installano il software.
La nuova GUI nell’assistente PDF24 visualizza gli elementi in maniera migliorie rispetto alla vecchia versione. La formattazione degli elementi ora dovrebbe essere ok con tutte le lingue. La vecchia GUI aveva problemi di formattazione utilizzando linguaggi con elementi di testo più grande. Inoltre ci sono stati problemi nelle versioni più vecchie della stampante PDF PDF24 quando veniva utilizzata in ambienti Windows con impostazioni DPI diverse da quella predefinita DPI 96.
L’explorer dell’Editor PDF24 ora utilizza l’impostazione di Explorer di Windows, che si trova nel Registro di sistema nel percorso HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer\NoDrives, per nascondere i drives. Gli amministratori di sistemi Citrix possono ora utilizzare questo per nascondere i drives che qualche utente non deve vedere.
Con questa opzione è possibile controllare se I documenti PDF stampati saranno caricati in editor se l’editor è aperto o meno. Di default i documenti PDF verranno caricati nell’ assistente e se l’editor è aperto, saranno caricati in esso. Gli utenti che non vogliono questa impostazione possono modificarla con questa nuova opzione.
L’ impostazione contiene una nuova area in cui un utente può aggiungere alcune stringhe che devono essere rimosse automaticamente dai nomi dei file che sono stati determinati nel processo di stampa in formato PDF. Alcune applicazioni aggiungono prefissi indesiderati ai nomi di file. Questa nuova area vi dà la possibilità di rimuoverli automaticamente. Ci sono stringhe preconfigurate per alcuni programmi come Microsoft Word.
Si verificava un fastidioso tremolio nella lista dei documenti PDF caricati quando si cliccava su un documento. Questo sfarfallio è stato eliminato.
Le GUI del nostro piccolo motore di rendering HTML sono ora più veloci. Alcuni GUI hanno un migliore aspetto ora e hanno rimosso o ridotto il tremolio.
La modalità anteprima di explorer dell’editor PDF24 è stata ottimizzata in modo che tutti gli elementi devono essere visualizzati in anteprima così come dovrebbero essere. Nelle versioni più vecchie accadeva che alcuni elementi di anteprima non potevano essere visualizzati correttamente.
I documenti PDF nell’Editor PDF24 possono essere visualizzati in alcune modalità di anteprima che possono essere cambiate dalle voci di menu. Ora è anche possibile modificare o ruotare la modalità di visualizzazione di tutti i documenti della lista dei documenti,tenendo premuto il tasto CTRL e usando la rotellina del mouse.
Il Creator PDF24 contiene ora un file di lingua portoghese. Questo è destinato a tutti gli utenti di lingua portoghese che ora possono scegliere questo file per localizzare il Creator PDF24 Portoghese.
Cliccando sul pulsante Salva con nome nell’assistente PDF24, si apre una finestra di dialogo in cui un utente può selezionare e configurare un filtro di uscita. Il filtro di uscita PDF contiene ora più opzioni per personalizzare il salvataggio del PDF. È ora possibile configurare lo standard, la rotazione della pagina, la risoluzione, il modello di colore, il metodo di compressione di immagini e il font.
Windows 7 and Windows Vista user could already use the enhanced PDF printer driver. Now this driver is is usable under Windows XP too. The new PDF printer driver is tuned for PDF creation. The driver supports a lot of new paper formats and does not contain a real limitation in paper size. The paper sizes A0, A1, A2 can now be used in addition to the old paper formats. Forthermore there is a option to customize the paper size.
This version is mainly a bug fix version which removes some minor bugs which we have found in the past. Forthermore we have enhanced some core parts of the software to be able to integrate new feature in the future.
Il PDF Creator contiene ora i file di lingua spagnola e giapponese.
Il programma di installazione contiene ora più file di lingue. Il programma di installazione vecchio aveva attivato solo i file di lingua tedesca e inglese. Ora ci sono file di lingua tedesca, inglese, francese, italiana, russa e spagnola.
Abbiamo aggiunto un file di lingua francese e migliorato quello italiano. I nuovi file sono forniti in versione 2.8.3.
Abbiamo migliorato la selezione automatica della lingua. I File di lingua devono avere un nome speciale in modo che la selezione automatica della lingua è in grado di trovarli. Se un file di lingua non è nominato correttamente la selezione della lingua automatica non riconosce il file ma il file può essere scelto manualmente nelle pagine di preferenza. Prima della versione 2.8.3 il file di lingua non poteva che essere chiamato con nomi inglesi, ma ora i file possono anche avere il nome in lingua locale, ad esempio, il file della lingua italiana può essere nominato Italian.lang o Italiano.lang.
Se una cartella contiene almeno uno shortcut a un’unità di rete mappata e l’unità non è né può essere connessa, l’utente dovrebbe preoccuparsi dei tempi di ritardo causati dalla procedura di autorisoluzione del problema. Il problema è risolto. Non ci sono più tempi di attesa. L’attesa può verificarsi solo se si fa doppio clic su un short cut cartella di rete e l’unità di rete non è collegata.
Se la stampante PDF24 di un PC appartenente a un dominio è stata condivisa e collegata ad un altro pc nel dominio, i processi di stampa potevano non essere reindirizzati all’account utente appropriato. Abbiamo migliorato la stampante PDF e ora è possibile utilizzare e condividere le stampanti PDF tra i computer in un dominio.
Se si cambia la lingua del Creator PDF senza dover riavviare il software dopo il cambiamento, allora si poteva vedere il placeholder in alcuni luoghi. Dopo il riavvio della stampante PDF i placeholders venivano visualizzati correttamente. Questa piccola imperfezione è stata risolta.
Il Creator PDF24 ora contiene file di lingua tedesca, inglese, italiana e russa. È possibile aggiungere altre lingue copiando e modificando un file di linguaggio esistente. Una piccola istruzione si trova nel nostro forum.
L’icona della barra di applicazioni può ora essere abilitata o disabilitata nelle pagine delle preferenze. L’icona contiene la funzionalità di cattura schermo che non può essere utilizzata se si disattiva l’icona stessa. Alcuni utenti che non ha bisogno di questa funzionalità o possono essere infastiditi dall’icona possono ora disattivarla.
Ora i bottoni sono più adatti per lo sfondo. I bordi sono più morbidi.
Se nessuna lingua è stato configurata per un utente, essa sarà determinata dal sistema. La determinazione automatica del linguaggio è stata ottimizzata. Ora il linguaggio giusto dovrebbe essere determinato correttamente se il file di lingua necessaria è disponibile.
Abbiamo migliorato la messa a punto ed alcuni componenti del Creator PDF24.
Usando i pulsanti per inviare tramite email i file PDF creati, si selezionava automaticamente la conferma di lettura. Questo è stato cambiato nella versione 2.8.1. Per impostazione predefinita la conferma di lettura è disattivata. Devi abilitare questa opzione manualmente se desideri leggere la conferma.
L’assistente contiene un’anteprima ora che vi dà una panoramica veloce del file PDF creato. L’anteprima si carica velocementeveloce e ha le funzionalità di base per visualizzare il documento. Grazie a questo è possibile vedere se tutte le pagine sono state create correttamente.
Quando si utilizza la funzione email una finestra di dialogo viene mostrata per modificare il nome del file che verrà allegato alla mail. Nelle versioni precedenti il nome del file allegato non poteva essere modificato, con la conseguenza che il file poteva avere un nome criptico in una email. Non c’era alcuna possibilità di cambiare il nome. A volte il nome era ok, perché PDF24 Creator dispone di un metodo di chiedere il nome dal monitor di Windows della stampante, ma non sempre viene assegnato un nome. Ora è possibile inserire un nome che abbia un significato.
È possibile modificare il nome di un documento nell’ editor tramite il menu contestuale. Nelle vecchie versioni si poteva cambiare nome solo quando si salvava un documento. È Utile questa caratteristica quando si invia un documento via email. Il nome di un file allegato a un email è il nome di un documento dell’editor. La nuova funzionalità offre la possibilità di cambiare il nome, e quindi di scegliere un buon nome per i file inviati per email.
Quando si invia tramite email un file creato si utilizza il programma standard di posta elettronica. Ci poteva essere un problema di focus durante l’apertura di questo programma standard di posta. Questo problema è stata rimosso.
Una stampante può essere condivisa in rete. Questo può anche essere fatto con la stampante PDF di PDF24 , ma c’era un problema durante la stampa su questa stampante da un PC che utilizza la stampante condivisa. Il messaggio era: “Could not open user pipe”. Questo problema è stato rimosso. Ora è possibile condividere una stampante PDF in una rete e usarla su altri PC nella rete. Un esempio tipico è un’applicazione client-server. Se avete un server in cui è in esecuzione un programma che viene utilizzato dai clienti, è possibile condividere la stampante PDF e installarla sul server in modo che i clienti possono stampare sulle loro stampanti PDF per ottenere alcuni tabulati dell’applicazione sul server.
La visione è stata migliorata. La vision è più veloce e il fastidioso sfarfallio è stato rimosso.
Il Creator PDF24 2.7.0 fornisce un modo per salvare i documenti non solo come PDF. Un sacco di filtri di output sono stati aggiunti in modo da poter salvare i documenti nei seguenti formati: PDF, PS, EPS, PCL, PNG, JPEG, BMP, PCX, TIFF, PSD. La maggior parte sono file immagine. Per il momento questi nuovi filtri di output sono disponibili solo nell’assistente PDF24. Un nuovo pulsante denominato “salva con nome” è stato aggiunto all’assistente per aprire una finestra di dialogo e di scegliere un formato di output. Ciascuno di questi formati di output in uscita hanno proprietà proprie che possono essere modificate per personalizzare l’output. Inoltre tutte le proprietà possono essere salvate in profili per ridurre i tempi per modificare le proprietà quando si crea un file.
Processes are visualized now. If the assistant saves or converts a document a small process windows is shwon so that the user can see that something happens. This is helpful even when operating with large files.
I componenti principali del PDF sono stati estesi in modo che l’editor PDF24 possa leggere ed aprire più file PDF. La maggior parte dei file PDF poteva già essere letta prima, ma ora il software è in grado di leggere molti più file.
È stata aggiunta una nuova opzione di screen capture. PDF24 Creator supporta ora gli Appunti di Windows. Non appena un’immagine è disponibile negli appunti l’apposita opzione può essere selezionata per generare un PDF di tali contenuti. Per copiare la schermata corrente negli appunti basta utilizzare il pulsante “stampa” sulla tastiera.
L’area proprietà è stata migliorata graficamente. Le sezioni sono strutturate meglio.
PDF24 Creator può importare immagini da periferiche come scanner, fotocamera digitale o webcam per creare file PDF basati su tali immagini importate. Il requisito è che questi dispositivi supportino anche l’interfaccia TWAIN. Se il dispositivo supporta l’interfaccia TWAIN è possibile selezionare il dispositivo tramite casella dispositivo di selezione. In questo modo è possibile creare mappe di immagini in formato PDF ed è possibile utilizzare per ottimizzare PDF24 PDF Creator per alcuni scopi, ad esempio, è possibile comprimere PDF per inviarlo via email.
Version 2.6.2 of PDF24 PDF Creator is now installable and usable within windows terminal server. This version has been tested within a Citrix terminal server environment.
Quando la stampante PDF veniva installata su sistemi con versioni a 64 bit di Windows Vista e 7, l’utente aveva un messaggio di errore che la stampante PDF non poteva essere installata. Questo problema è stato risolto. Il Creator PDF24 può ora essere installato su sistemi a 32-bit e 64-bit con Windows XP, Vista, 7 come sistema operativo.
Se il Creator PDF24 è stato installato senza rimuovere una vecchia versione ci potevano essere dei conflitti. Ora il nuovo programma di installazione controlla se è presente una vecchia versione e la disinstalla prima di installare quella nuova.
Per disinstallare PDF24 Creator, tutti i componenti in esecuzione dovevano essere chiusi. Se un componente era in esecuzione, il programma di disinstallazione bloccava processo di disinstallazione. Il problema era che PDF24 Creator utilizza un componente in esecuzione nascosto per creare file PDF e questo componente doveva essere chiuso dall’utente. Per facilitare tutto, ora il programma di installazione e disinstallazione chiude questo componente nascosto automaticamente e all’utente è sufficiente chiudere tutti i componenti visibili in esecuzione appartenenti a PDF24 Creator.
Il Creator PDF24 è stato ottimizzato per gli ambienti multi utente. Ci sono stati problemi nelle vecchie versioni quando si usava la stampante PDF in un PC con più di un utente. Questo problema è stato risolto. Ora è possibile utilizzare la stampante PDF sul PC con più utenti.
Il comportamento di aggiornamento è stato cambiato. Non tutti gli utenti possono installare gli aggiornamenti. PDF Creator controlla gli attributi di sicurezza degli utenti e determina se un utente ha i diritti necessari per aggiornare il programma. Un utente con diritti limitati non può installare gli aggiornamenti ma possono farlo solo gli amministratori. Le nuove caratteristiche di Windows Vista e Windows 7 sono state prese in considerazione. Gli utenti con diritti limitati vedranno solo una notifica che è disponibile un aggiornamento.
Ora è possibile catturare lo schermo o solo una porzione dello schermo per creare un PDF di tali contenuti. Ci sono diverse opzioni: schermo intero, schermo zona di lavoro, finestre attive, contenuto della finestra attiva o di una zona definita dall’utente. La funzione di cattura schermo si trova nell’icona PDF24 creator della barra di applicazioni
Icona della barra di applicazioni integrata per il Creator PDF24. Attualmente l’icona viene utilizzata per visualizzare le impostazioni, aprire l’editor PDF, mostrare informazioni, chiudere il programma e utilizzare la funzionalità di cattura schermo. L’icona viene visualizzata se un processo di creazione PDF è in esecuzione. Le notifiche del Programma possono anche essere mostrate.
Il Creator PDF24 utilizza nuovi driver per la stampante PDF. I nuovi driver offrono più funzionalità delle vecchie versioni. Ora non vi è alcuna limitazione nel formato carta. Possono essere creati piccoli o grandi pagine. Il driver contiene la maggior parte della carta comunemente utilizzata, le misure ISO A0 - A7, lettera, libro mastro, executive. È possibile inoltre creare un formato carta predefinito.
Ora vi è una area centrale per le preferenze. Questa zona può essere aperta da diversi posti. L’utente può configurare più impostazioni rispetto a versioni precedenti. L’area di preferenze può essere utilizzata su PC con più di un utente. Non tutti gli utenti possono modificare tutte le impostazioni, ad esempio, solo gli amministratori possono modificare il comportamento di aggiornamento. L’UAC di Windows Vista e 7 è stato preso in considerazione. Un utente visualizzerà un messaggio se una proprietà non può essere selezionata a causa di diritti limitati. Vi è inoltre la possibilità di modificare lo status utente, se è un amministratore, in modo da poter fare tutte le modifiche.
Il PDF Creator è stato ristrutturato per rendere pronto il programma per gli sviluppi futuri.
Ci potrebbe essere un dealock in alcune circostanze nel viewer PDF. Il problema è stato risolto. Inoltre potete navigiare attraverso le pagine con i tasti freccia ora.
L’explorer ora supporta i collegamenti / link. Può essere nascosto in modo che si veda solo l’elenco dei documenti. Ci sono voci di menu adeguate per nascondere o mostrare l’explorer.
Le impostazioni del programma e le impostazioni di un utente sono rigorosamente separate. Ogni utente può modificare il suo creator PDF in modo che si adatti alle sues esigenze. La modifica verrà salvata in profili utente. Solo gli amministratori possono modificare le impostazioni che riguardano l’intero programma.
La componente che è responsabile per la conversione di documenti in PDF ora supporta i collegamenti / link nel file system. Inoltre un bug nello strumento è stato risolto.
Il programma di aggiornamento del Creator PDF24 è stato ridisegnato e ampliato. La guida utente è stata modificata. L’aggiornamento supporta ambienti multi utente ora. Gli utenti con diritti limitati possono eseguire l’aggiornamento per cercare gli aggiornamenti, ma non possono installarlo. Questo è riservato agli amministratori.
C‘era stato un errore nel processo di firma al momento della firma di un file PDF in Windows Vista e Windows 7. Parte della firma non era corretta. Il bug è stato risolto. le firme sono corrette ora. Le firme possono essere controllate in Adobe Reader.
L’ora di un processo di firma non veniva salvata correttamente. Il problema era il fuso orario. Il bug è stato risolto.
Il programma di installazione del Creator PDF24 è stato migliorato. Ora l’installer ricerca i componenti attivi. Se uno dei componenti è attivo il programma di installazione avvisa l’utente che tutti i componenti devono essere chiusi. Il programma di installazione installa solo un aggiornamento / nuova versione se tutti i componenti sono chiusi. Questo funziona anche in un ambiente multi utente. Finché ogni utente dispone di una componenti in esecuzione il programma di installazione impianti isolati.
L’editor PDF24 può essere avviato con un file, ad esempio, trascinando un file sull’icona dell’ editor PDF24. Questo non era possibile nelle versioni precedenti. Il file verrà caricato automaticamente nell’editor e verrà convertito se non è un PDF.
Il set contiene icone più grandi, in modo che il simbolo del programma sembra molto meglio quando si utilizza una grande anteprima in Esplora risorse.
La selezione della lingua al primo avvio del programma è stata ottimizzata. C’era un problema nella versione 2.5. In questa versione veniva sempre selezionata la lingua tedesca l problema è stato risolto. La lingua tedesca viene selezionata su sistemi con lingua tedesca e la lingua inglese per tutti gli altri. Questa versione viene fornita con un file di lingua tedesca e un file di lingua inglese.
Con i profili che si può controllare la qualità e la compressione di un PDF. Si avrà un risultato di qualità inferiore se il file PDF è di piccole dimensioni, e un risultato di qualità superiore se di grandi dimensioni. Un profilo può essere cambiato nell’assistente PDF dopo la creazione di un PDF tramite la stampante PDF24 o nel menu contestuale di un documento nell’editor. Le impostazioni del programma contengono un’opzione per impostare il profilo standard che viene selezionato come default.
I file PDF possono essere inviati via email. Questo può essere fatto nell’assistente di creazione dei PDF, dopo che un PDF è stato creato con PDF24 stampante o in interfaccia utente. Un pulsante è stato aggiunto nell’assistente creazione di PDF assieme a diverse voci di menu e un pulsante della barra degli strumenti è stato aggiunto nell’editor per inviare un PDF.
Il Creator PDF24 può ora firmare i documenti PDF. Il software contiene tutto ciò che serve a creare e inserire una firma in un documento PDF. La firma può essere fatta con certificati auto firmati, che possono essere creati con PDF24 Creator o con una carta di firma. Quando si utilizza una carta di firma un middleware speciale di Windows è necessario per rendere i certificati sulla carta disponibili e utilizzabili. La firma è solo integrata nell’editor. L’editor contiene un nuovo pulsante della barra degli strumenti e una nuova voce di menu contestuale per aprire una finestra di dialogo di firma. Con la firma di dialogo è necessario scegliere un certificato e inserire alcune informazioni necessarie per la firma.
Questa versione determina i nomi dei file per i file PDF creati con l’aiuto dell’interfaccia della stampante di Windows. Se si stampa un documento con nome XYZ su PDF24 stampante, un file PDF verrà creato e il nome XYZ sarà determinato come nome per il PDF. Questo aiuta quando si lavora con PDF24 Creator soprattutto quando si crea un sacco di file PDF. Questo può essere utilizzato da altri software per dare ai documenti PDF un nome quando viene creato con PDF24 stampante.
Le immagini possono ora essere convertite in PDF un po’ meglio. Il PDF creato non contiene più i margini ma solo l’immagine. Questo può essere usato per creare belle mappe di immagini PDF quando si convertono le immagini in PDF e si fondono in un solo file PDF. Il file risultante può contenere immagini con diverse dimensioni.
L’usabilità è stata migliorata molto in modo che l’utente deve fare meno click quando lavora con l’editor. Questo include le funzioni di unione e cancellare con i pulsanti della barra degli strumenti. Sulla base della selezione dei documenti può essere deciso quello che dovrebbero essere fusi o soppressi. Questo permette di risparmiare un clic nel momento della scelta tra tutti o solo i documenti selezionati.
Se si apriva la finestra di dialogo delle impostazioni di sicurezza, si apportavano le modifiche, si salvava e chiudeva e poi si riapriva la finestra, le modifiche apportate non venivano visualizzate correttamente nonostante veniva salvato correttamente. Questo problema è stato risolto.
Selezionando una singola pagina non si selezionano più tutti i documenti PDF caricati. Questo era un bug nelle versioni precedenti. Se l’utente seleziona una singola pagina in un documento, allora il documento che contiene la pagina diventa selezionata. Tutti gli altri documenti diventano deselezionati.
L’editor PDF24 si apre molto velocemente. Una schermata di avvio non avrebbe senso qui. Quindi l’abbiamo rimossa. La schermata di avvio mostrava l’immagine personalizzata. Come rimpiazzo per la schermata iniziale abbiamo inserito un link nella zona ai piedi dell’editor. Facendo clic su questo link si apre una finestra con il contenuto che in precedenza rappresentava la schermata iniziale. L’immagine personalizzata in quella finestra è cliccabile. Un click sull’immagine apre un browser con l’URL che è stato specificato nel processo di personalizzazione.
Le voci del menu per le opzioni che sono selezionati erano visualizzati in grigio e non potevano essere selezionate nuovamente. le voci di menu in grigio rappresentano di norma uno stato che è inutilizzabile. Abbiamo cambiato questo con uno Stato che visualizza una casella di controllo di fronte a una voce di menu per visualizzare all’utente che questo stato è attualmente selezionato. Questo è migliore e più facile da capire.
L’area delle impostazioni viene visualizzata ora in una nuova interfaccia utente e abbiamo aggiunto alcune altre opzioni per personalizzare il Creator PDF24. Ora è possibile modificare il profilo di comportamento, di aggiornamento, il linguaggio e la qualità standard.
Il programma di installazione installa un driver adatto alla stampante durante l’installazione in Windows 7. Il Creator PDF24 può essere utilizzato ora con Windows 7.
Tutti i componenti di PDF24 Creator sono firmati con un certificato in modo che si avrà la certezza che PDF24 Creator è sicuro e non è stato modificato da un terzo. Windows Vista e Windows 7 vi mostrerà un messaggio corrispondente quando si avvia il Creator PDF24 se il programma è sicura o no.
Il comportamento dell’ aggiornamento è stato modificato leggermente. È possibile personalizzare le impostazioni. Si può scegliere tra tre opzioni (automatico, solo controlla e notifica, disabilita). Il programma di aggiornamento e le altre parti di programma sono state adattate alle nuove opzioni.
La grafica dell’ assistente è stata migliorata. Una casella di selezione per selezionare un profilo di qualità e un pulsante per inviare il file PDF creato via email sono state aggiunte. L’aggiornamento e il tasto info sono stati rimossi e inseriti come link nella barra inferiore. Tutti i pulsanti ora rappresenta tasti funzione puri che fanno qualcosa con il PDF creato.
Ci sono due nuovi strumenti nell’editor PDF24. Uno strumento è in grado di creare un certificato auto firmato e l’altro apre un gestore certificati, dove è possibile gestire i certificati. Questi strumenti sono importanti per la funzionalità di firma.
Ci poteva essere una situazione di stallo nel viewer integrato quando un documento conteneva pagine di altri documenti, e quando questo documento è mostrato nel viewer. Navigare tra le pagine poteva causare il deadlock. Questo bug è stato rimosso.
Questa versione contiene un editor PDF che ha le seguenti funzionalità:
Il programma di aggiornamento è state estratto e inserito nel suo proprio file eseguibile e la funzionalità sono stati ampliate.
Il programma di background PDFBackend è stato migliorato. Questo programma rimane in background attendendo un nuovo processo di stampa che può iniziare su PDF24 stampante.
L’installazione del driver della stampante PDF è stata migliorata. Il nuovo programma di installazione può installare diversi driver di stampante che possono essere utilizzati con PDF24.
Aggiunta una applicazione che converte i documenti tipo Word o PowerPoint in PDF. In questa versione viene fatta la conversione con l’aiuto di PDF24 stampante PDF. Il programma deve essere avviato con un documento come argomento che quindi lo stampa sulla stampante PDF24.
L’assistente ha ora un pulsante per modificare un PDF creato. Un clic su questo pulsante avvia l’editor e carica il file PDF creato.
Se l’editor PDF è aperto e se un nuovo PDF è creato con PDF24 stampante poi il PDF creato si carica automaticamente nell’editor e non in assistente.